Installation method of linear slide
Release time:
2023-10-30
1. Clean up the dirt on the assembly surface of the bed table. 2. Place the linear slide rail on the bed table smoothly, and let the reference surface of the side of the slide rail rest against the assembly surface of the bed table. 3. Try to lock the assembly screws to confirm whether the bolt holes match, and roughly fix the reference surface at the bottom of the slide rail to the assembly surface at the bottom of the bed.
1. Clean up the dirt on the assembly surface of the bed table.
2. Place the linear slide rail on the bed table smoothly, and let the reference surface of the side of the slide rail rest against the assembly surface of the bed table.
3. Try to lock the assembly screws to confirm whether the bolt holes match, and roughly fix the reference surface at the bottom of the slide rail to the assembly surface at the bottom of the bed.
4. Use lateral fixing screws to press the side reference plane of the slide rail to the side assembly plane of the bed table in order to confirm the position of the slide rail.
5. Use a torque wrench to lock the assembly screws in sequence with a specific torque, and approach the reference plane at the bottom of the slide rail to the bottom of the bed.
6. Install the remaining paired rails according to steps 1 to 5.
Straight Line,Guide rail,Slide,Screw